| Mixing capability Mixing channels 32 Mono + 4 Stereo |
|
GROUP 8 |
|
AUX 8 |
|
MAIN Stereo |
|
Input channel functions Gate, Attenuator, 4-band PEQ, 2x Compressor, Delay, Pan |
|
Output channel functions Attenuator, 4-band PEQ, Compressor, Delay |
|
On-board processors 4x SPX multi effectors |
|
I/O Mic inputs 12 |
|
Phantom power +48V DC; ON/OFF per 4ch |
|
Line inputs 2x Stereo, 2x 2tr in |
|
AD converter 24-bit; 128-time over sampling |
|
Line outputs Stereo output, Monitor output, 4x Omni output |
|
DA converter 24-bit; 128-time over sampling |
|
Digital I/O ADAT (8-in/8-out), 2tr in/out |
|
Expansion slots Mini-YGDAI (16-in/16-out) |
|
Control and others To Host(USB), MIDI, Word clock I/O |
|
General specifications |
|
Internal processing 32bit, Accumulator | 58bit |
|
Sampling frequency rate Internal 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz |
|
External 44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%) |
|
Signal delay Less than 1.6ms CH INPUT to STEREO OUT (@SampIing frequency = 48kHz) / Less than 0.8ms CH INPUT to STEREO OUT (@SampIing frequency = 96kHz) |
|
Total harmonic distortion CH INPUT to STEREO OUT | Less than 0.05%, 20Hz to 20kHz @+14dBu into 600Ω / Less than 0.01%, 1kHz @+24dBu into 600Ω (@SampIing frequency = 48kHz) / Less than 0.05%, 20Hz to 40kHz @+14dBu into 600Ω / Less than 0.01%, 1kHz @+24dBu into 600Ω (@SampIing frequency = 96kHz) |
|
Frequency response CH INPUT to STEREO OUT | 0.5, -1.5dB, 20Hz - 20kHz @+4dBu into 600Ω(@SampIing frequency = 48kHz) / 0.5, -1.5dB, 20Hz - 40kHz @+4dBu into 600Ω(@SampIing frequency = 96kHz) |
|
Dynamic range 110dB typ. DA Converter (STEREO OUT) / 105dB typ. AD+DA (to STEREO OUT) @fs=48kHz / 105dB typ. AD+DA (to STEREO OUT) @fs=96kHz |
|
Hum & noise level Equivalent input noise -128dBu Equivalent Input Noise. |
|
Residual output noise -86dBu residual output noise. STEREO OUT | STEREO OUT off. / -86dBu (90dB S/N) STEREO OUT | STEREO fader at nominal level and all CH INPUT faders at minimum level. / -64dBu (68dB S/N) STEREO OUT | STEREO fader at nominal level and one CH INPUT fader at nominal level |
|
Crosstalk -80dB adjacent input channels (CH1-12) / -80dB adjacent input channels (CH13-16) / -80dB input to output |
|
Power requirements AC100V, 120V, 220-240V 50/60 Hz |
|
Power consumption 90W |
|
Dimensions W 436mm; 17-1/8in |
|
H 148mm; 5-7/8in |
|
D 548mm; 21-5/8in |
|
Net weight 14kg; 30.86lbs |
|
Others Fader | 100mm motorized x17 |
|
Analog Input Characteristics |
|
Input Terminal PAD GAIN Actual Load Impedance For Use With Nominal Input Level Connector |
|
Sensitivity Nominal Max. before clip |
|
CH INPUT |
|
1 to 12 0 -60dB 3kohms 50-600ohm Mics & 600ohm Lines -70dBu -60dBu -40dBu A | XLR-3-31 type (Balanced) |
|
B | TRS phone jack (Balanced) |
|
-16dB -26dBu -16dBu +4dBu |
|
20 -6dBu +4dBu +24dBu |
|
CH INPUT |
|
13 to 16 -26dB 10kohms 600ohm Lines -36dBu -26dBu -6dBu TRS phone jack (Balanced) |
|
+4dB -6dBu +4dBu +24dBu |
|
CH INSERT IN 1 to 12 10kohms 600ohm Lines -12dBu -2dBu +18dBu TRS phone jack (Unbalanced) |
|
2TR IN [L,R] 10kohms 600ohm Lines -10dBV -10dBV +10dBV RCA pin jack (Unbalanced) |
點(diǎn)擊放大
